Volumetric Filling Machine

As an eminent enterprise, we Manufacturer, Exporter & Supplier offer Volumetric Filling Machine. Moreover, our provided machine is available at cost effective prices. It is widely applauded and cherished because of its longer life and optimum design. For manufacturing it, we make use of only the first-rate raw material. A team of qualified experts strictly matches the quality to industrial quality standards to ensure there is no drop in the quality.

Structure and Working :

• Augur filler is made strong and vibration free by its specially designed Pillar structure. This is made from Mild steel ROUND Pipe section of good thickness Hard chrome Plated, which holds drive unit, hopper and related parts. A drive motor and an electromagnetic clutch brake assembly are driving the Augur. A safety cover is provided to this assembly to protect from accidents and to avoid dust from drive. Main driven shaft connected to the drive shaft through a Bearing housing holds and rotates freely when the machine is operated. A stirrer blade provided separately which is operated independently over the driven shaft. The driven shaft is holding an accurately machined stainless steel AUGUR which performs the filling inside the Nozzle.

• The lower parallel flights of the auger within the funnel are machined to a constant pitch so that, when filled, each pitch has a precise volume. The auger drive rotates the auger at constant speed to produce a continuous dosing flow. The agitation blade, generally separately driven and controlled, rotates in the opposite direction to the auger breaking any bridge that tends to form in non-free flowing powders. The agitation blade extends right down to the throat of the funnel preventing rat-holing and cavitation and ensuring that the flights are fully filled. The start/stop signals to the auger drive control the pre-set weight in Weigh metric fillers.

Technical Specifications Afae1000 

• Machine size - 1000 L X 700W X 2100mm height.
• Drive Motor - 1 HP 230VAC 50Hz, 1440 rpm. with VFD(Variable Frequency Drive)
• Power  -  220VAC 50Hz Single Phase
• Stirrer motor - 1 Hp 32RPM 230VAC Worm Geared
• Electromagnetic Clutch- Brake - HSCBC 100, 24 VAC Cryotron Make
• All material contact parts in S.S. 304
• Stainless steel 304 Augur (Screw) type filling.
• Hopper size - 40 Litres (S.S 304), 18 Gauge, mirror finish for AFAE1000
• Fill capacity - 50-1000 gms at a time as per set time,
• Weigh balance - Maximum load capacity -  3 Kgs.
• Maximum Fill capacity - 1000gms, as per set weight on weigh balance.(easily settable)
• Output - 15 fills per minute

Additional features :

• Augur Based filling equipped with digital Weigh balance (load cell).
• One touch Start by a foot-switch    
• Drive through electro-magnetic clutch brake system to get high accuracy filling.
• High output and increased efficiency.
• Slow speed geared motor attached to stirrer helps to feed augur uniformly
• Output of 15 fills/minute can be achieved.
• High Accuracy up-to +/- 0.5% of fill volume.
• Low maintenance needed in this model.